Administrator Guide

show boot bmp
Display the current state of bare metal provisioning (BMP) or the jump-start process.
C9000 Series
Syntax
show boot bmp
Parameters
bmp Display the current information on the state of BMP or the jump-start process.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#show boot bmp
Reload type is set to normal mode. BMP process is in disabled state
show boot system
Display information about boot images currently stored on the system.
C9000 Series
Syntax
show boot system all
From a PE console, use the following:
show boot system {stack-unit unit number | all}
Parameters
all Display the boot images stored on the system for the Control Processor, Route
Processor, and line card CPUs.
From a PE console, display boot image information on all the unit.
stack-unit unit-
number
Display the boot image information for a specified stack-unit. The stack-unit
number range is from 0 to 7.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
178 File Management