Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
Dell#show file flash://startup-config
! Version 1-0(0-4079)
! Last configuration change at Wed Jun 24 02:02:40 2015 by default
! Startup-config last updated at Wed Jun 24 02:02:44 2015 by default
!
boot system rpm0 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm0 secondary system: A:
boot system rpm0 default system: A:
boot system rpm1 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm1 secondary system: A:
boot system rpm1 default system: A:
!
service timestamps log datetime
!
logging coredump
!
hostname Dell
!
protocol lldp
!
feature extended-bridge
!
redundancy auto-failover-limit count 3 period 60
redundancy auto-synchronize full
!
redundancy disable-auto-reboot pe all
!
enable password 7 b125455cf679b208e79b910e85789edf
!
username admin password 7 1d28e9f33f99cf5c
!
linecard 0 provision C9000LC2410G
!
interface TenGigabitEthernet 0/0
!
protocol lldp
no shutdown
!
!
!
Example (PE
Console)
Related
Commands
format flash — Erases all the existing files and reformats the file system in the internal flash memory.
show file-systems
Display information about the file systems on the system.
Syntax
show file-systems
From a PE console, use show file-systems to view the file-system information.
File Management 181