Administrator Guide

access-list-name Enter the name of a configured ACL.
StartingSeqNum Enter the starting sequence number to resequence. For IPv4 and IPv6 ACLs, the
range is 0 to 4294967290; for MAC ACLs, the range is 0 to 65535.
Step-to-
Increment
Enter the step to increment the sequence number. For IPv4 and IPv6 ACLs, the
range is 0 to 4294967290; for MAC ACLs, the range is 0 to 65535.
Defaults The sequence number of ACL entries increases in multiples of 5; for example, seq 5, seq 10, seq 15 ...
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale (IPv6).
8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
When you have exhausted all the sequence numbers, this feature permits re-assigning a new sequence
number to entries of an existing access-list.
Related
Commands
resequence prefix-list ipv4 — resequences a prefix list.
resequence prefix-list ipv4
Re-assign sequence numbers to entries of an existing prefix list.
C9000 Series
Syntax
resequence prefix-list ipv4 {prefix-list-name StartingSeqNum Step-to-
increment}
Parameters
prefix-list-name Enter the name of the configured prefix list, up to 140 characters long.
StartingSeqNum Enter the starting sequence number to resequence. The range is from 0 to 65535.
Step-to-
Increment
Enter the step to increment the sequence number. The range is from 1 to 65535.
Defaults none
230 Access Control Lists (ACL)