Administrator Guide

vlan vlan-range (OPTIONAL) Enter the keyword vlan and then enter a range of VLANs. The range
is from 1 to 4094 (you can use IDs 1 to 4094).
NOTE: This option is available only with the keywordin option.
in Enter the keyword in to configure the ACL to filter incoming traffic.
out Enter the keyword out to configure the ACL to filter outgoing traffic.
Defaults none
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
You can assign one ACL (standard or extended) to an interface.
If you apply a MAC ACL on a VLAN:
● None of the VLAN members can have another ACL applied which has an entry for the VLAN.
● The VLAN cannot belong to an ACL VLAN group.
If you apply a MAC ACL on a physical or port-channel interface, a VLAN to which the port is associated
cannot have another ACL applied.
If you apply a MAC ACL on an ACL VLAN group, none of the VLANs in the group can have another ACL
applied.
Related
Commands
mac access-list standard — configures a standard MAC ACL.
mac access-list extended — configures an extended MAC ACL.
show mac access-lists
Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of
matches/mismatches against each ACL entry displayed.
C9000 Series
Syntax
show mac access-lists [acl_name word | interface } {in | out | interface}
Parameters
access-list Displays information on all L2 access-lists configured.
Access Control Lists (ACL) 263