Administrator Guide

seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 packets)
show mac accounting access-list
This command displays ACL Mac accounting information.
C9000 Series
Syntax
show mac accounting access-list {acl_name} {interface | cam_count}
Parameters
access-list Display accounting information of all L2 access-lists configured.
acl_name Display accounting information for specified access-list.
interface Display accounting information for L2 access-list attached to a particular interface.
cam_count Display accounting information of L2 access-lists with cam_count.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series
6.1.1.0 Introduced on the E-Series.
Usage
Information
Displays occur only if the access-list is attached to an interface.
If no access-list is attached to the interface, no information displays and you are returned to the DELL#
prompt.
Example
show mac accounting access-list
mac access-list standard mac
seq 5 permit 11:22:33:44:55:66 count
seq 10 deny any log threshold-in-msgs 10 interval 5 order 1
seq 15 permit any order 2 monitor
!
Access Control Lists (ACL) 265