Administrator Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.5.1.0 Introduced
aggregate-address
To minimize the number of entries in the routing table, summarize a range of prefixes.
C9000 Series
Syntax
aggregate-address ip-address mask [advertise-map map-name] [as-set]
[attribute-map map-name] [summary-only] [suppress-map map-name]
Parameters
ip-address mask Enter the IP address and mask of the route to be the aggregate address. Enter the
IP address in dotted decimal format (A.B.C.D) and mask in /prefix format (/x).
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map then the name of a configured
route map to set filters for advertising an aggregate route.
as-set
(OPTIONAL) Enter the keyword as-set to generate path attribute information
and include it in the aggregate.
AS_SET includes AS_PATH and community information from the routes included in
the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map then the name of a configured
route map to modify attributes of the aggregate, excluding AS_PATH and
NEXT_HOP attributes.
summary-only (OPTIONAL) Enter the keyword summary-only to advertise only the aggregate
address. Specific routes are not advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map then the name of a configured
route map to identify which more-specific routes in the aggregate are suppressed.
Defaults Not configured.
Command Modes
● ROUTER BGP ADDRESS FAMILY
● ROUTER BGP ADDRESS FAMILY IPv6
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Border Gateway Protocol 325