Administrator Guide

Related
Commands
capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.
show ip bgp
View the current BGP IPv4 routing table for the system.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 {unicast}]
[network [network-mask] [longer-prefixes]] [cluster-list cluster-id]
[community community-number] [community-list community-list-name]
[dampened-paths] [extcommunity-list list name] [filter-list as-path-name]
[flap-statistics [ip-address [mask]]] [neighbors [all {received-routes}]
[network[network-mask]]] [next-hop] [paths] [peer-group peer-group-name]
[regexp regular-expression] [summary]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view ipv4–
unicast route information corresponding to that VRF.
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related
to ipv4 unicast routes.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 multicast to view information only
related to ipv4 multicast routes.
ipv6 unicast (OPTIONAL) Enter the keywords ipv6 unicast to view information only related
to ipv6 unicast routes.
network (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP
network to view information only on that network.
network-mask (OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network
address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
cluster-list
cluster-id
(OPTIONAL) Enter the keyword cluster-list then the cluster-ID to display the routes matching the
cluster.
community
community-
number
(OPTIONAL) Enter the keyword community then the community–number to display the routes matching
the communities.
community-
list community-
list-name
(OPTIONAL) Enter the keyword community-list then the community–list–name to display the routes
matching the community–list
dampened-paths (OPTIONAL) Enter the keyword dampened-paths to display the paths suppressed due to dampening.
extcommunity-
list list name
(OPTIONAL) Enter the keyword extcommunity-list then the list name to display the routes
matching the extended community-list.
filter-list as-
path-name
(OPTIONAL) Enter the keyword filter-list then the as-path-name to display the routes conforming
to the filter–list.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to display flap statistics of the routes.
neighbors (OPTIONAL) Enter the keyword neighbors to display the detailed information on TCP and BGP
neighbor connections.
neighbors [all
{received-
routes}]
(OPTIONAL) Enter the keyword neighbors [all {received-routes}] to display all the received
routes both accepted and rejected from all the IPv4 or IPv6 neighbors.
next-hop (OPTIONAL) Enter the keyword next-hop to view all the next-hop information on the learnt routes.
394 Border Gateway Protocol