Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

391

392

393

394

395

396

397

398

399

400

Version Description

9.8(0.0) Introduced on the S3048–ON and S4048–ON.

9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.

9.4.(0.0) Added support for VRF.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage

Information

The following describes the show ip bgp cluster-list command shown in the following example.

Field Description

Network Displays the destination network prefix of each BGP route.

Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column,

then local routes exist in the routing table.

Metric Displays the BGP route’s metric, if assigned.

LocPrf Displays the BGP LOCAL_PREF attribute for the route.

Weight Displays the route’s weight.

Path Lists all the ASs the route passed through to reach the destination network.

Example

Dell#show ip bgp cluster-list

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0

BGP local router ID is 192.168.11.6

Status codes: s suppressed, S stale, d dampened, h history, * valid, >

best

Path source: I - internal, a - aggregate, c - confed-external, r -

redistributed

n - network, D - denied, S - stale

Origin codes: i - IGP, e - EGP, ? - incomplete

Network Next Hop Metric LocPrf Weight Path

*>I 55.0.0.0/24 172.16.0.2 0 0 400

500 600 i

*>I 66.0.0.0/24 172.16.0.2 0 0 500 i

*>I 77.0.0.0/24 172.16.0.2 0 0 i

Dell#show ip bgp cluster-list 4.4.4.4