Administrator Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp next-hop command shown in the following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Time Elapsed Displays the time elapsed since the next hop was learned. If the route is down, this
field displays time elapsed since the route went down.
Example
Dell# show ip bgp next-hop
Next-hop Resolved
172.16.0.2 YES
Dell#
show ip bgp paths
View all the BGP path attributes in the BGP database.
C9000 Series
Syntax
show ip bgp paths [regexp regular-expression]
Parameters
regexp regular-
expression
Enter a regular expression then use one or a combination of the following
characters to match:
● . = (period) any single character (including a white space).
● * = (asterisk) the sequences in a pattern (zero or more sequences).
● + = (plus) the sequences in a pattern (one or more sequences).
● ? = (question mark) sequences in a pattern (either zero or one sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
● [ ] = (brackets) a range of single-character patterns.
● ( ) = (parenthesis) groups a series of pattern elements to a single element.
● { } = (braces) minimum and the maximum match count.
414 Border Gateway Protocol