Administrator Guide

address family ipv6 unicast
This command changes the context to subsequent address family identifier (SAFI).
C9000 Series
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast command.
Parameters
ipv6 Enter the keyword ipv6 to specify the address family as IPv6.
unicast Enter the keyword unicast to specify multicast as SAFI.
Defaults IPv6 Unicast
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Usage
Information
All subsequent commands apply to this address family after you execute this command. You can exit from
this AFI/SAFI to the IPv6 Unicast (the default) family by entering exit and returning to the Router BGP
context.
aggregate-address
Summarize a range of prefixes to minimize the number of entries in the routing table.
C9000 Series
Syntax
aggregate-address ipv6-address prefix-length [advertise-map map-name] [as-
set] [attribute-map map-name] [summary-only] [suppress-map map-name]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map followed by the name of a
configured route map to set filters for advertising an aggregate route.
as-set (OPTIONAL) Enter the keywords as-set to generate path attribute information
and include it in the aggregate.
AS_SET includes AS_PATH and community information from the routes included in
the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map followed by the name of a
configured route map to modify attributes of the aggregate, excluding AS_PATH
and NEXT_HOP attributes.
summary-only (OPTIONAL) Enter the keywords summary-only to advertise only the aggregate
address. Specific routes will not be advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map followed by the name of a
configured route map to identify which more-specific routes in the aggregate are
suppressed.
Border Gateway Protocol 439