Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

451

452

453

454

455

456

457

458

459

460

Command Modes

● EXEC

● EXEC Privilege

Command

History

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.2.1.0 Introduced on the E-Series ExaScale.

7.5.1.0 Introduced

Commands

● clear ip bgp – enables route reflection between route reflector and clients.

● show capture bgp-pdu neighbor – configures a route reflector and clients.

● capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.

clear ip bgp ipv6-address

Reset BGP sessions specific to an IPv6 address. The soft parameter (BGP Soft Reconfiguration) clears the policies without

resetting the TCP connection.

C9000 Series

Syntax

clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-

statistics | soft {in | out}} | unicast {flap-statistics | soft {in | out}}

| ipv6 unicast {flap-statistics | soft {in | out}| soft [in | out]

Parameters

ipv6-address

Enter an IPv6 address to reset neighbors belonging to that IP. Used without a

qualifier, the keyword resets all neighbors belonging to that IP.

flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all flap statistics

belonging to that AS or a specified address family within that IP.

ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.

ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.

unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the

selected address family.

multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within

the selected address family. Multicast is supported on IPv4 only

soft (OPTIONAL) Enter the keyword soft to configure and activate policies without

resetting the BGP TCP session, that is, BGP Soft Reconfiguration.

NOTE: If you enter clear ip bgp ip6-address soft, both inbound

and outbound policies are reset.

in (OPTIONAL) Enter the keyword in to activate only inbound policies.

out (OPTIONAL) Enter the keyword out to activate only outbound policies.

Command Modes EXEC Privilege