Administrator Guide

debug ip bgp ipv6 unicast dampening
View information on routes being dampened.
C9000 Series
Syntax
debug ip bgp ipv6 unicast dampening
To disable debugging, use the no debug ip bgp ipv6 unicast dampening command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening information.
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
debug ip bgp ipv6 unicast updates
View information about BGP updates.
C9000 Series
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address prefix-
length updates [in | out] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates received from
neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.
Defaults Disabled.
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Border Gateway Protocol 459