Administrator Guide

debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
C9000 Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in
| out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name] notifications [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received from
neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors.
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp updates
Allows you to view information about BGP updates.
C9000 Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6 unicast
[ipv6-address]] updates [in | out | prefix-list prefix-list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name | ipv6 unicast [ipv6-address]] updates [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view BGP updates received from neighbors.
460 Border Gateway Protocol