Administrator Guide

When another user enters CONFIGURATION mode, Dell Networking OS sends a message similar to the following:
% Warning: User "admin" on line vty2 "172.16.1.210" is in configuration
In this case, the user is “admin” on vty2.
Obtaining Help
As soon as you are in a command mode there are several ways to access help.
To obtain a list of
keywords at any
command mode:
Type a ? at the prompt or after a keyword. There must always be a space before the ?.
To obtain a list of
keywords with a
brief functional
description:
Type help at the prompt.
To obtain a list of
available options:
Type a keyword and then type a space and a ?.
To obtain a list of
partial keywords
using a partial
keyword:
Type a partial keyword and then type a ?.
Example
The following is an example of typing ip ? at the prompt:
Dell(conf)# ?
aaa Authentication, Authorization and
Accounting
arp Set a static ARP entry
asf-mode Enable Cut-Thru Mode
banner Define a login banner
bfd Configure BFD protocol
boot Modify system boot parameters
bpdu-destination-mac-address Use Provider Bridge Address for xStp/Gvrp
cam-acl Configure CAM ACL
cam-audit Configure CAM auditing parameters
cam-acl-egress Configure Egress CAM ACL
cam-optimization Optimize Cam utilization
class-map Configure Class Map for QoS
clock Configure time-of-day clock
configuration Enables exclusive configuration mode
crypto SSH key generation and IPSec policy
configuration
control-plane-cpuqos Control plane CPU Qos configuration
default Set a command to its default
default-vlan Change flooding on default vlan
define Interface range macro definition
dot1x Configure 802.1x
ecmp-group ECMP group configuration
enable Modify enable password parameters
end Exit from configuration mode
ethernet Ethernet options
exit Exit from configuration mode
fastpatch Process runtime patch
fefd-global Enable FEFD globally
ftp-server FTP configuration subcommands
garp Configure GARP parameters
hash-algorithm Hash algorithm command
hg-link-bundle-monitor Configure HiGig Link Bundle Monitoring
hostname Set system's network name
http-server Configure the HTTP server
interface Select an interface to configure
ip Global IP configuration subcommands
ipv6 Global IPv6 configuration subcommands
CLI Basics
47