Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

471

472

473

474

475

476

477

478

479

480

Parameters

ipv6-address

Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group-name

Enter the name of the peer group to remove the private AS numbers.

Defaults Disabled (that is, private AS number are not removed).

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Command

History

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.2.1.0 Introduced on the E-Series ExaScale.

7.4.1.0 Introduced

Usage

Information

Applies to EBGP neighbors only.

If the AS-PATH contains both public and private AS number or contains AS numbers of an EBGP

neighbor, the private AS numbers are not removed.

If a confederation contains private AS numbers in its AS-PATH, the software removes the private AS

numbers only if they follow the confederation numbers in the AS path.

Private AS numbers are 64512 to 65535.

neighbor route-map

Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.

C9000 Series

Syntax

neighbor {ipv6-address | peer-group-name} route-map map-name {in | out}

To remove the route map, use the no neighbor {ipv6-address | peer-group-name}

route-map map-name {in | out} command.

Parameters

ipv6-address

Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal fields of zeros.

peer-group-name

Enter the name of the peer group.

map-name

Enter the name of an established route map. If you do not configure the Route

map, the default is deny (to drop all routes).

in Enter the keyword in to filter inbound routes.

out Enter the keyword out to filter outbound routes.

Defaults Not configured.