Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

481

482

483

484

485

486

487

488

489

490

Parameters

process-id

Enter the number of the OSPFv3 process. The range is 1 to 65535.

match external {1

| 2}

(OPTIONAL) Enter the keywords match external to redistribute OSPF external

routes. You can specify 1 or 2 to redistribute those routes only.

match internal (OPTIONAL) Enter the keywords match internal to redistribute OSPFv3

internal routes only.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map followed by the name of an

established route map. Only the following ROUTE-MAP mode commands are

supported:

● match ipv6 address

● match ipv6 next-hop

● match ipv6 route-source

● set ipv6 next-hop

If you do not configure the route map, the default is deny (to drop all routes).

Defaults Not configured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Command

History

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.2.1.0 Introduced on the E-Series ExaScale.

7.4.1.0 Introduced

Usage

Information

When you enter the redistribute ospf process-id command without any other parameters, the

software redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes.

router bgp

Enter ROUTER BGP mode to configure and enable BGP.

C9000 Series

Syntax

router bgp as-number

To disable BGP, use the no router bgp as-number command.