Administrator Guide

Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from the same
neighbor AS but with a different AS-Path.
C9000 Series
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
C9000 Series
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length | ip-
address] [advertised-routes | dampened-routes | detail | flap-statistics |
routes]
Parameters
ipv6-address
prefix-length |
ip-address
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros or
enter an IP address in dotted decimal format to reset all prefixes from that
neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv6 address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on
the neighbor’s routes.
Border Gateway Protocol 493