Administrator Guide

Usage
Information
This command takes effect only after reboot.
On the C9010, OpenFlow supports only the scaled-l3-hosts hardware forwarding-table mode (UFT mode
3), providing a unified forwarding table (UFT) of:
● L2 MAC entries: 160K
● L3 host entries: 144K
● L3 route entries: 16K
OpenFlow does not support the scaled-l3-routes forwarding-table mode (UFT mode 4) on the C9010.
Related
Commands
show hardware forwarding-table mode — displays the hardware forwarding table mode in the current
boot and in the next boot.
Content Addressable Memory (CAM) 511