Administrator Guide

GVRP 14988129080 551480 14987577600
ARP RESP/ARP REQ 29604578172 3559868 29601018304
802.1x 0 0 0
FEFD 0 0 0
FRRP 0 0 0
ECFM 0 0 0
L2PT 0 0 0
ISIS 0 0 0
BFD 0 0 0
BGP 0 0 0
v6 BGP 0 0 0
OSPF 0 0 0
v6 OSPF 0 0 0
RIP 0 0 0
VRRP 0 0 0
v6 VRRP 0 0 0
IGMP 0 0 0
PIM 0 0 0
NTP 0 0 0
MULTICAST CATCH ALL 0 0 0
v6 MULTICAST CATCH ALL 0 0 0
DHCP RELAY/DHCP 0 0 0
v6 ICMP NA/v6 ICMP RA 0 0 0
v6 ICMP NS/v6 ICMP RS 0 0 0
v6 ICMP/ICMP 0 0 0
MLD 0 0 0
MSDP 0 0 0
FTP/TELNET/SSH/
L3 LOCAL TERMINATED 0 0 0
L3 UNKNOWN/UNRESOLVED ARP 0 0 0
iSCSI 0 0 0
FCoE 0 0 0
SFLOW 0 0 0
VLT CTRL/VLT IPM PDU 0 0 0
HYPERPULL 0 0 0
OPENFLOW 0 0 0
L2 DST HIT/BROADCAST 0 0 0
VLT TTL1/TRACEFLOW/TTL0/
STATION MOVE/TTL1/IP OPTION/
L3 MTU FAIL/SOURCE MISS 0 0 0
Related
Command
clear control-traffic protocol
show control-traffic queue
Display per-queue counters of rate-limited control-plane traffic.
C9000 Series
Syntax
show contol—traffic queue {all | queue-id queue-number} counters
Parameters
all Enter the keyword all to display counters for rate-limited traffic on all CPU
queues, including Route Processor, Control Processor, and line-card CPUs.
queue-id queue-
number
Enter the queue number to display counters for rate-limited traffic on a specified
CPU queue. For the C9000 Series, the range of queue-number values is from 0 to
20. The twenty-one control–plane queues are divided into groups of seven queues
for the Route Processor, Control Processor, and line-card CPUs as follows:
C9000 Series
● Queues 0 to 6 process packets destined to the Control Processor CPU .
● Queues 7 to 13 process packets destined to the Route Processor CPU.
● Queues 14 to 20 process packets destined to the line card CPU.
Control Plane Policing (CoPP) 517