Administrator Guide

Example
Dell#show mac protocol-queue-mapping
Protocol Destination Mac EtherType Queue
EgPort Rate (kbps)
-------- --------------- --------- -----
------ -----------
ARP any 0x0806 Q1/Q8/Q2/Q9 CP/
RP 100
FRRP 01:01:e8:00:00:10/11 any Q19
LP 300
LACP 01:80:c2:00:00:02 0x8809 Q13
RP 500
LLDP any 0x88cc Q6
CP 500
GVRP 01:80:c2:00:00:21 any Q12
RP 200
STP 01:80:c2:00:00:00 any Q13
RP 150
ISIS 01:80:c2:00:00:14/15 any Q13
RP 500
09:00:2b:00:00:04/05 any Q13
RP 500
show protocol-queue-mapping
Display the protocol-queue mapping for each configured protocol.
C9000 Series
Syntax
show protocol-queue-mapping [queue-id queue-number]
Parameters
queue-id queue-
number
(Optional) Display the protocol-queue mapping for a specified control-plane queue.
The range of CPU queue numbers is from 0 to 20.
Defaults Not configured.
Command Modes EXEC Privilege
Usage
Information
The show output displays information on CPU traffic flows for all protocols, including the ingress queue
at which the traffic is queued and the CPU to which protocol traffic is sent with the applied rate limits
(configured or default) in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as:
RP (Route Processor), CP (Control Processor), and LC (line card).
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show protocol-queue-mapping | no-more
Protocol Queue EgPort CommitRate(kbps) Peak
Rate(kbps) CommitBurst(kb) Peak Burst(kb)
-------- ----- ------ ---------------
------------- -------------- ------------
522 Control Plane Policing (CoPP)