Administrator Guide

Example
Dell# show dcb
stack-unit 1 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
show hardware pfc-nodrop-priority
View the packets drop count corresponding to the priority.
Syntax
show hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number
port-set port-pipe
Parameters
stack-unit stack-
unit-number
Enter the keywords stack-unit and the stack unit number. The range is from 0
to 5.
port-set port-
pipe
Enter the keywords port-set and port-pipe number. The port-pipe number is 0.
Command Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Example
Dell#show hardware pfc-nodrop-priority l2-dlf drops stack-unit 0 port-set 0
---------------------------------------------------
Priority DropCount
---------------------------------------------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Related
Commands
pfc-nodrop-priority l2-dlf drop — configures to drop the unknown unicast packets flooding on lossless
priorities.
show interface pfc
Display the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
C9000 Series
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
port-type slot/
port pfc
Enter the port-type slot and port PFC information.
{summary |
detail}
Enter the keyword summary for a summary list of results or enter the keyword
detail for a full list of results.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
534 Data Center Bridging (DCB)