Administrator Guide

Starting test: pcieScanTest ......
17 PCI devices installed out of 17
pcieScanTest ................................................ PASS
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
Starting test: showTemperature ......
+Board First Thermal Monitor Sensor[0] is 42.0 C
+Board First Thermal Monitor Sensor[1] is 33.0 C
+Board First Thermal Monitor Sensor[2] is 34.0 C
+Board First Thermal Monitor Sensor[3] is 255.0 C
CPU Temp 25 c
DDR Temperature 33 c
showTemperature ............................................. PASS
slotInfoTest ................................................ PASS
Starting test: spiFlashAccessTest ......temperature monitor 0: current=
52.0, peak= 54.1
temperature monitor 1: current= 52.5, peak= 54.7
temperature monitor 2: current= 53.1, peak= 56.3
temperature monitor 3: current= 52.5, peak= 54.1
temperature monitor 4: current= 54.1, peak= 56.8
temperature monitor 5: current= 54.7, peak= 56.8
temperature monitor 6: current= 55.8, peak= 57.4
temperature monitor 7: current= 56.3, peak= 58.5
temperature monitor 8: current= 56.3, peak= 58.5
average current temperature is 54.1
maximum peak temperature is 58.5
spiFlashAccessTest .......................................... PASS
Starting test: udfLinkStatus ......
ERROR: Unit 0 xe port 25 is DOWN
udfLinkStatus ............................................... FAIL
xeLinkSpeedTest ............................................. PASS
Starting test: xeLinkStatusTest ......
ERROR: xe port 1 is DOWN
ERROR: xe port 5 is DOWN
ERROR: xe port 9 is DOWN
ERROR: xe port 13 is DOWN
ERROR: xe port 17 is DOWN
ERROR: xe port 21 is DOWN
xeLinkStatusTest ............................................ FAIL
--------- Group Test Statistics ---------
Cpu Name : CP00
Total : 24
Passed : 17
Failed : 7
Aborted : 0
Elapsed time : 00H:00M:11S
Stop reason : after completion
------ Failed tests (level, times) ------
CpuGbeLinkStatusTest (0, 1)
hgLinkStatusTest (0, 1)
i2cTest (0, 1)
opticEepromTest (0, 1)
opticPresenceTest (0, 1)
udfLinkStatus (0, 1)
xeLinkStatusTest (0, 1)
Example: show
diag testcase
stack-unit (PE
Console)
Dell#show diag testcase stack-unit 1
----------------------------------------- L0 L1 L2 L3 IA
boardRevision: ALL RUN YES NO NO NO NO
cpldAccess: ALL RUN YES NO NO NO NO
cpuSnakeStackExt: ALL RUN NO NO NO NO YES
cpuType: ALL RUN YES NO NO NO NO
deviceShutPhy: ALL RUN NO NO NO NO YES
deviceShutPoe: ALL RUN NO NO NO NO YES
fanControllerSpeedGet: ALL RUN YES NO NO NO NO
fanStatusLED: ALL RUN NO NO NO NO YES
fanStatusMonitor: ALL RUN YES NO NO NO NO
Debugging and Diagnostics 581