Administrator Guide

Linecard slot 5: No card diags executed yet (Card not Offline).
Linecard slot 6: No card diags executed yet (Card not Offline).
Linecard slot 7: Not present.
Linecard slot 8: Not present.
Linecard slot 9: Not present.
Linecard slot 10: Not present.
Linecard slot 11: No card diags executed yet (Card not Offline).
-------------------------------------------------------------------
Example: PE
Console
Dell#show diag information
Diag information:
Diag software image version:
1-0(0-4092)
-------------------------------------------------------------------
stack-unit Member 0: Not present.
stack-unit Member 1: No Unit diags executed yet (stack-unit not
Offline).
stack-unit Member 2: Not present.
stack-unit Member 3: Not present.
stack-unit Member 4: Not present.
stack-unit Member 5: Not present.
stack-unit Member 6: Not present.
stack-unit Member 7: Not present.
-------------------------------------------------------------------
show diag testcase
Display the offline diagnostic tests available for the CPUs at each level.
C9000 Series
Syntax
show diag testcase {cp |linecard | pe pe-id [alllevels | level0 | level1 |
level2]}
From a PE console, use show diag testcase {stack-unit unit-number [alllevels |
interactive | level0 | level1 | level2]}
Parameters
cp unit-id Enter the cp unit-id parameters to display only the offline diagnostic tests
available on the Control Processor CPU. The Control Processor CPU ID is 0.
pe Enter thepe pe-id parameters to display only the offline diagnostic test available
on the port extender (PE).
stack-unit unit-
number
Enter thestack-unit unit number parameters to display only the offline
diagnostic test available on the specified stack unit. The range is from 0 to 7.
linecard slot-id Enter the linecard slot-id parameters to display only the offline diagnostic
tests available for a specified line card. The range of line-card CPU IDs is from 0 to
11. Each line-card CPU processes packets on the corresponding switch line card;
for example, line-card CPU 1 processes packets on line card 1.
alllevels Enter the keyword alllevels to display the complete set of offline diagnostic
tests.
interactive Enter the keyword interactive to display interactive diag testcases.
level0 Enter the keyword level0 to display only the Level 0 diagnostic tests. Level 0
diagnostics check for the presence of various components and perform essential
path verifications. In addition, they verify the identification registers of the
components on the board.
level1 Enter the keyword level1 to display only the Level 1 diagnostic tests. Level 1
diagnostics is a smaller set of diagnostic tests with support for automatic
584 Debugging and Diagnostics