Administrator Guide

rtcBattery: ALL RUN NO NO NO NO YES
rtcFunctional: ALL RUN NO NO NO NO YES
rtcPresence: ALL RUN YES NO NO NO NO
rtcRollover: ALL RUN NO NO NO NO YES
rtcRW: ALL RUN NO YES NO NO NO
sevendigitStackLED: ALL RUN NO NO NO NO YES
sfpPlusEepromAccess: ALL RUN YES NO NO NO NO
sfpPlusEepromRW: ALL RUN NO YES NO NO NO
sfpPlusPhyExtLink: ALL RUN NO YES NO NO NO
sfpPlusPhyExtSpeed: ALL RUN NO YES NO NO NO
sfpPlusPhyRW: ALL RUN NO YES NO NO NO
sfpPlusPortLED: ALL RUN NO NO NO NO YES
sfpPlusPresence: ALL RUN YES NO NO NO NO
snakeOneGMac: ALL RUN NO NO YES NO NO
snakeOneGPhy: ALL RUN NO NO YES NO NO
snakeSfpPlusMac: ALL RUN NO NO YES NO NO
snakeSfpPlusPhy: ALL RUN NO NO YES NO NO
snakeStackMac: ALL RUN NO NO YES NO NO
snakeStackPhy: ALL RUN NO NO YES NO NO
stackLED: ALL RUN NO NO NO NO YES
stackPhyExtLink: ALL RUN NO YES NO NO NO
stackPhyExtSpeed: ALL RUN NO YES NO NO NO
stackPhyRW: ALL RUN NO YES NO NO NO
systemInfo: ALL RUN NO NO NO NO YES
systemReset: ALL RUN NO NO NO NO YES
systemStatusLED: ALL RUN NO NO NO NO YES
systemTempMonitorLEDTest: ALL RUN NO NO NO NO YES
tsensorAccess: ALL RUN YES NO NO NO NO
usbAccess: ALL RUN YES NO NO NO NO
usbPowerEnable: ALL RUN YES NO NO NO NO
usbRW: ALL RUN NO YES NO NO NO
usbStatus: ALL RUN YES NO NO NO NO
watchdogTimer: ALL RUN NO NO NO NO YES
Hardware Commands
The hardware commands supported on the switch allow you to display information from a hardware sub-component or ASIC.
clear control-traffic
Clear control-traffic statistics from the CPU.
C9000 Series
Syntax
clear control—traffic {all | cp—switch | linecard slot-id portset port-
pipe} counters
Parameters
cp-switch Enter the keyword cp-switch to clear the counters for control traffic on the
control plane.
linecard slot-id
portset port-pipe
Enter the slot ID and port pipe to clear the counters for control traffic on a
specified switch line card and port set. The range of slot IDs is from 0 to 2. The
range of port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1 and 2.
all Enter the keyword all to clear control-traffic statistics on the control plane and
all line cards.
Defaults None.
Command Modes EXEC Privilege
Example
Dell# clear control-traffic cp-switch counters
588 Debugging and Diagnostics