Administrator Guide

● port-stats: Displays status about why an SFM port is not brought up to
register level.
● register: Displays the internal registers for each switch fabric.
● table-dump: Displays the tables from the bShell.
system Enter the keyword system to display the current status of the system hardware.
The command options are:
● system {bp-link-state}: Displays the statistics related to the backplane
link state bit map.
● system {bp-link-state linKId range}: Displays the status of the
specified link. LinKId range for the system is from 0 to 155.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Modified the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Modified the stack-port keyword range expanded from 49-52 to 0-52; output
modified for the cpu data-plane statistics option; the following options
were added: drops [unit 0-1 [port 0-27]] and unit 0-1 {counters
| details | port-stats [detail] | register}
7.7.1.0 Introduced on the S-Series.
Example
(Linecard CPU
Dataplane:
Statistics)
Dell#show hardware linecard 2 cpu data-plane statistics
HANSKVILLE Mib Counters:
TR 64 byte frames = 3
TR 127 byte frames = 358
TR 255 byte frames = 1363
TR 511 byte frames = 1934
TR 1023 byte frames = 18
TR MAX Byte frames = 6202
TR MGV Frames = 0
Bytes Transmitted = 0
Frames Transmitted = 9878
Mcast Frames Transmitted = 0
Bcast Frames Transmitted = 4
Pause Frames Transmitted = 0
Deferred Transmits = 0
Excessive Deferred Transmits = 0
TX single collisions = 0
TX multiple collisions = 0
TX late collisions = 0
Debugging and Diagnostics 595