Administrator Guide

show hardware buffer
Display buffer statistics for a specified interface.
C9000 Series
Syntax
show hardware {interface interface [buffer-info | priority-group [group
number | all] | queue [queue number | all]]
Parameters
interface
interface
Enter the keyword interface then type one of the following interface types and
slot/port or number information:
● For a 1–Gigabit Ethernet interface, enter the keyword gigabitethernet.
● For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
● For a port extender (PE) Gigabit Ethernet interface, enter the keyword
peGigabitEthernet then the pe-id, stack-unit unit number, and port-id. The
pe-id range is 0–255; the stack unit number range is 0–7; and the port-ID range
is 0 –47.
● For a port extender 10-Gigabit Ethernet interface, enter the keyword
peTenGigE then the pe-id / stack-unit / port-id information. The pe-id range
is from 0 to 255; the stack-unit unit-number range is from 0 to 7; and the port-
id range is 25 to 28 or 49 to 52 depending on the PE.
NOTE: The peGigE or peTenGigE interface option is only available when the
extended bridge is enabled.
buffer-info Enter the keyword buffer-info to view the total buffer allocated for the
Interface
priority-group
group number |
all
Enter the keyword priority-group and specify a priority group number or all
the priority groups. The range for priority group is from 0 to 7.
queue queue
number | all
Enter the keyword queue and specify a queue number or select all for all the
queues. The range for queue number is from 0 to 19.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
Example (show
hardware buffer
interface peGige
buffer-info)
Dell#show hardware buffer interface peGigE 10/1/1 buffer-info
----- Buffer Stats for Interface PeGi 10/1/1 -----
Maximum Shared Limit for the Interface: 6956
Default Packet Buffer allocate for the Interface: 160
Used Packet Buffer for the Interface: 0
Example
(priority-group
0)
Dell# show hardware buffer interface peGigE 10/1/1 priority-group 0
buffer-info
606 Debugging and Diagnostics