Administrator Guide

slice=6, slice_idx=0, part =0 prio=0xc00, flags=0x10602, Installed,
Enabled
tcam: color_indep=1024,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
SrcMac
Offset: 89 Width: 48
DATA=0x00000000 08000000
MASK=0x0000ffff ffffffff
action={act=CopyToCpuCancel, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
action={act=EtagNew, param0=65772(0x100ec), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL
EID 0x00000bff: gid=0x5,
slice=6, slice_idx=0x1, part =0 prio=0xbff, flags=0x10202, Installed,
Enabled
tcam: color_indep=0,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
SrcMac
Offset: 89 Width: 48
DATA=0x00000000 08000100
MASK=0x0000ffff ffffffff
action={act=DropCancel, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL
show hardware system-flow
This command displays hardware system-flow information.
C9000 Series
Syntax
show hardware system-flow {cp-switch | linecard slot-id port-set port
number | pe pe-id stack-unit unit–number port-set port-pipe-id } counters
Parameters
cp-switch Enter the keyword cp-switch to display the counters for control traffic on the
control plane.
linecard slot-id Enter the linecard slot-id parameters to identify the line card on which you
want to clear system-flow statistics. The range of slot IDs is from 0 to 11.
Debugging and Diagnostics 613