Administrator Guide

pe peid Enter the keyword pe and the port extender (PE) ID to display the counters for a
specified PE. The PE ID ranges is from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and unit number to display the counters for the
specified stack-unit. The stack unit range is from 0 to 7.
port set port-
pipe
Enter the keyword port-set and port-pipe number. The port-set number is 0.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
Dell# show hardware system-flow pe 1 stack-unit 0 port-set 0
######### FP Entry for IPC traffic destined to stack_unit 4 PE CPU#######
EID 0x000003fb: gid=0xd,
slice=11, slice_idx=0x5, part =0
prio=0x3fb,flags=0x10602,Installed, Enabled
tcam: color_indep=1024,
Stage
InPorts
DATA=0x0000000000000000000000000000000000000000000000c000000000000
MASK=0x0000000000000000000000000000000000000000000000dffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
DstIp
Offset: 105 Width: 32
DATA=0x7f080141
MASK=0xffffffff
OuterVlanId
Offset: 8 Width: 12
DATA=0x00000ffc
MASK=0x00000fff
action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0),
param3=0(0)}
action={act=RedirectPort, param0=4(0x4), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 58 slice = 0 idx=15 entries=1}{Packets}
######### FP Entry for IPC traffic destined to stack_unit 5 PE CPU#######
EID 0x000003fa: gid=0xd,
slice=11, slice_idx=0x6, part =0 prio=0x3fa, flags=0x10602,
Installed, Enabled
tcam: color_indep=1024,
Stage
InPorts
DATA=0x0000000000000000000000000000000000000000000000c000000000000
614
Debugging and Diagnostics