Administrator Guide

Dell#exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user
on line
console
This is the banner
Dell Networking OS con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on
line
console
This is the banner
Dell>
Related
Commands
line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
C9000 Series
Syntax
banner login {acknowledgement | keyboard-interactive | no keyboard-
interactive} [c line c]
Parameters
keyboard-
interactive
Enter the keyword keyboard-interactive to require a carriage return (CR) to
get the message banner prompt.
acknowledgemen
t
Enter the acknowledgement keyword to require a positive acknowledgement
from the user while logging in to the system.
c Enter a delineator character to specify the limits of the text banner. The delineator
is a percent character (%).
line Enter a text string for your text banner message ending the message with your
delineator. The delineator is a percent character (%). Range: maximum of 50 lines,
up to 255 characters per line
Defaults No banner is configured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the acknowledgement keyword.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced the keyword keyboard-interactive.
8.1.1.0 Introduced on the E-Series ExaScale.
62 Control and Monitoring