Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
621622623624625626627628629630
Usage
Information
You can enter the ip address dhcp relay information and the vendor-class
indentifier, for example:
ip address dhcp relay information-option remote-id mac
ip address dhcp relay information-option remote-id mac vendor-class-
identifier
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the configured DHCP server.
ip address dhcp vendor-class-identifier
Include the vendor-class identifier option (option 60) in DHCP packets sent by the client.
C9000 Series
Syntax
ip address dhcp vendor-class-identifier text
Parameters
vendor-class-
identifier
text
Include a user-configurable text string with the hardware-related information
(option 60) in DHCP packets sent by the client (32 characters maximum).
Default None.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Usage
Information
Use this command to include the vendor-class identifier (option 60) in DHCP packets sent by the client.
This option is used by DHCP clients to identify the vendor type and configuration of a DHCP client. The
vendor-class identifier includes hardware-related information that identifies the switch and includes a
user-configurable text string .
ip address dhcp vendor-class-identifier relay information-option
ip address dhcp vendor-class-identifier relay information-option remote-id
mac
Related
Commands
ip address dhcp — configures an interface to receive its IP address from the configured DHCP server.
ip dhcp relay secondary-subnet
Enable DHCP relay secondary-subnet on all the interfaces in a switch.
C9000 Series
Syntax
[no] ip dhcp relay seconday-subnet
To disable the dhcp relay secondary-subnet, use theno ip dhcp relay secondary-subnet
command.
Defaults Disabled.
Dynamic Host Configuration Protocol (DHCP) 627