Administrator Guide

To exit from ecmp group mode, use the exit command.
Parameters
percent Indicate the threshold value when traffic distribution starts being monitored on an
ECMP link bundle. The range is from 1 to 90%. The default is 60%.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
link-bundle-monitor enable
Provides a mechanism to enable monitoring of traffic distribution on an ECMP link or LAG bundle.
C9000 Series
Syntax
link-bundle-monitor enable
To exit from ECMP group mode or Port- Channel mode, use the exit command.
Command Modes
● ECMP-GROUP
● PORT-CHANNEL INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
show config
Display the ECMP configuration.
C9000 Series
Syntax
show config
Equal Cost Multi-Path (ECMP) 655