Administrator Guide

ipc Enter the keyword ipc for IPC-specific debugging.
tx Enter the keyword tx for packet transmit-specific debugging.
rx Enter the keyword rx for packet receive-specific debugging.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.x.x.x Introduced on the C9000 Series.
9.2(0.2) Added the tx parameter.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
C9000 Series
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-link-
instantiation | virtual-link-maintenance| vlan-discovery] [interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on which to enable
debugging. The options are:
● all — Enter the keyword all to enable debugging on all the options.
● discovery — Enter the keyword discovery to enable debugging on FCF
advertisements and ENode solicitation.
● virtual-link-instantiation — Enter the keywords virtual-link-
instantiation to enable debugging on FLOGI, FDISC, and FLOGO packets.
● virtual-link-maintenance — Enter the keywords virtual-link-
maintenance to enable debugging on FIP clear virtual link frames and
keepalives.
● vlan-discovery — Enter the keywords vlan-discovery to enable
debugging on VLAN requests and notifications.
interface Enter the following keywords and slot/port or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
FCoE Transit 659