Administrator Guide

Version Description
8.3.12.0 Introduced on the S4810.
Usage
Information
The maximum number of FCFs supported per FIP snooping-enabled VLAN is twelve. The maximum
number of FIP snooping sessions supported per ENode server is 32 by default. You can configure up to 64
sessions.
fip-snooping fc-map
Configure the FC-MAP value FIP snooping uses on all VLANs.
C9000 Series
Syntax
fip-snooping fc-map fc-map-value
To return the configured FM-MAP value to the default value, use the no fip-snooping fc-map
command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command Modes
● CONFIGURATION
● VLAN INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
fip-snooping max-sessions-per-enodemac
Configure the maximum session limit per ENode MAC address.
C9000 Series
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the configured maximum sessions to the default value, use the no fip-snooping max—
sessions—per—enode—mac command.
Parameters
max-sessions-
value
Enter the maximum number of sessions allowed per ENode MAC address. The
range is from 1 to 64.
Defaults 32
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
FCoE Transit 661