Administrator Guide

disable
Disable the resilient ring protocol.
C9000 Series
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
interface
Configure the primary, secondary, and control-vlan interfaces.
C9000 Series
Syntax
interface {primary interface secondary interface control-vlan vlan-id}
To return to the default, use the no interface {primary interface secondary interface
control-vlan vlan-id} command.
Parameters
primary interface Enter the keyword primary to configure the primary interface then one of the
following interfaces and slot/port information:
● Fast Ethernet interface: enter the keyword FastEthernet then the
slot/port information.
● Port Channel interface: enter the keyword port-channel then a
number. The range is from 1 to 128.
● 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
● 40-Gigabit Ethernet interface: enter the keyword fortyGigE then
the slot/port information
secondary
interface
Enter the keyword secondary to configure the secondary interface then one of
the following interfaces and slot/port information:
682 Force10 OS Resilient Ring Protocol (FRRP)