Administrator Guide
● The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type
(0x01).
● The attribute that was being parsed had an invalid attribute length.
● The attribute that was being parsed had an invalid GARP event.
● The attribute that was being parsed had an invalid VLAN ID. The valid range is from 1 to 4095.
A failed registration can occur for the following reasons:
● Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP
Blocking state).
● An entry for a new GVRP VLAN could not be created in the GVRP database.
Example
Dell# show gvrp statistics int te 1/0
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
Invalid Messages/Attributes skipped: 0
Failed Registrations: 0
Dell#
Related
Commands
show gvrp — displays the GVRP configuration.
GARP VLAN Registration (GVRP) 697