Administrator Guide

Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale. Prior releases supported
2094.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
When creating an interface range, interfaces appear in the order they are entered; they are not sorted.
The command verifies that interfaces are present (physical) or configured (logical).
Important Points to Remember:
● Bulk configuration is created if at least one interface is valid.
● Non-existing interfaces are excluded from the bulk configuration with a warning message.
● The interface range prompt includes interface types with slot/port information for valid
interfaces. The prompt allows for a maximum of 32 characters. If the bulk configuration exceeds 32
characters, it is represented by an ellipsis ( ... ).
● For PE ports, the interface range prompt includes interface type with pe-id / stack-unit / port-
id.
● When the interface range prompt has multiple port ranges, the smaller port range is excluded
from the prompt.
● If overlapping port ranges are specified, the port range is extended to the smallest start port and the
biggest end port.
Example (Bulk)
Dell EMC(conf)# interface range te 10/0, fo 0/0, te 2/0
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Example
(Multiple Ports)
Dell EMC(conf)# interface range te 2/0 - 23, te 2/1 - 10
Dell(conf-if-range-te-2/0-23#
Example
(Overlapping
Ports)
Dell EMC(conf)# interface range te 2/1 - 11, te 2/1 - 23
Dell(conf-if-range-te-2/1-23#
Example (If
atleast one port
is configured)
DellEMC(conf)# interface range tengigbitethernet 2/1 - 11,
tengigbitethernet 2/1 - 23
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Example (If no
ports are
configured within
the specified
interface range)
DellEMC(conf)# interface range tengigbitethernet 2/0 - 23, fortyGigE
0/0, tengigbitethernet 2/0
% Error: No port is configured in interface range
724 Interfaces