Administrator Guide

Usage
Information
In the Examples, the delta column displays changes since the last screen refresh.
The following are the monitor command menu options.
Key Description
systest-3 Displays the host name assigned to the system.
monitor time Displays the amount of time since the monitor interface command was
entered.
time Displays the amount of time the chassis is up (since last reboot).
m Change the view from a single interface to all interfaces on the line card or visa-
versa.
c Refresh the view.
b Change the counters displayed from Packets on the interface to Bytes.
r Change the [delta] column from change in the number of packets/bytes in the last
interval to rate per second.
l Change the view to the next interface on the line card, or if in line card mode, the
next line card in the chassis.
a Change the view to the previous interface on the line card, or if in line card mode,
the previous line card in the chassis.
T Increase the screen refresh rate.
t Decrease the screen refresh rate.
q Return to the CLI prompt.
Example
Dell# monitor interface fortyGigE 2
Dell Networking operating system uptime is 3 minute(s)
Monitor time: 00:00:00 Refresh Intvl.: 2s
Interface Link In Packets [delta] Out
Packets [delta]
Fo 2/4 Up 2 0
2 0
Fo 2/8 Down 0 0
0 0
Fo 2/12 Down 0 0
0 0
Fo 2/16 Up 1 0
1 0
Fo 2/20 Up 1 0
1 0
Fo 2/24 Down 0 0
0 0
Fo 2/28 Up 2 0
1 0
Fo 2/32 Up 1 0
2 0
Fo 2/36 Down 0 0
0 0
Fo 2/40 Up 0 0
2 0
Fo 2/44 Up 0 0
2 0
Fo 2/48 Down 0 0
0 0
Fo 2/52 Down 0 0
0 0
Fo 2/56 Down 0 0
0 0
Fo 2/60 Down 0 0
0 0
Fo 2/64 Down 0 0
Interfaces
731