Administrator Guide

Layer 2
Overhead
Link MTU and IP MTU Delta
Untagged Packet
with VLAN-Stack
Header
22 bytes
Tagged Packet
with VLAN-Stack
Header
26 bytes
no port-delay-restore (Interface Mode)
Disables delayed bring up of individual interfaces during switch boot up.
Syntax
no port-delay-restore
Parameters None
Defaults Enabled
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command-Line Reference Guide.
Version Description
9.14(2.3) Introduced on the C9000, S3048-ON, S3100 series, S4048-ON, S4048T-ON,
S5048F-ON, S6000, S6000-ON, S6010-ON, S6100-ON, and Z9100-ON.
Usage
Information
To disable the timer on an individual interface, use the no port-delay-restore command.
To disable the timer on all ports globally, use the no port-delay-restore command in
CONFIGURATION mode.
NOTE: This command does not work on the Port Extender ports.
Related
Commands
port-delay-restore (Interface Mode) — allows a delayed bring up of all interfaces during switch
boot up.
port-delay-restore (Configuration Mode)
Allows a delayed bring up of all interfaces during switch boot up.
Syntax
port-delay-restore value
To return to the default value, use the no port-delay-restore command.
Parameters
value Enter a timer value from 1 second to 300 seconds.
Defaults Disabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command-Line Reference Guide.
Version Description
9.14(2.3) Introduced on the C9000, S3048-ON, S3100 series, S4048-ON, S4048T-ON,
S5048F-ON, S6000, S6000-ON, S6010-ON, S6100-ON, and Z9100-ON.
Interfaces 735