Administrator Guide

Line Description
is set to true. If it falls below the low alarm/warning thresholds, the Rx power low
alarm/warning flag is set to true.
Data Ready state
Bar
This field indicates that the transceiver has achieved power up and data is ready.
This is set to true if data is ready to be sent and set to false if data is being
transmitted.
Rx LOS state This is the digital state of the Rx_LOS output pin. This is set to true if the
operating status is down.
Tx Fault state This is the digital state of the Tx Fault output pin.
Rate Select state This is the digital state of the SFP rate_select input pin.
RS state This is the reserved digital state of the pin AS(1) per SFF-8079 and RS(1) per
SFF-8431.
Tx Disable state If the admin status of the port is down, then this flag is set to true.
Temperature
High Alarm Flag
This can be either true or false, depending on the Current voltage value displayed
above.
Voltage High
Alarm Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Tx Bias High
Alarm Flag
This can be either true or false, depending on the present Tx bias current value
displayed above.
Tx Power High
Alarm Flag
This can be either true or false, depending on the Current Tx bias power value
displayed above.
Rx Power High
Alarm Flag
This can be either true or false, depending on the Current Rx power value displayed
above.
Temperature Low
Alarm Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage Low
Alarm Flag
This can be either true or false, depending on the Current voltage value displayed
above.
Tx Bias Low
Alarm Flag
This can be either true or false, depending on the Tx bias current value displayed
above.
Tx Power Low
Alarm Flag
This can be either true or false, depending on the Current Tx power value displayed
above.
Rx Power Low
Alarm Flag
This can be either true or false, depending on the Current Rx power value displayed
above.
Temperature
High Warning
Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage High
Warning Flag
This can be either true or false, depending on the Current Voltage value displayed
above.
Tx Bias High
Warning Flag
This can be either true or false, depending on the Tx bias current value displayed
above.
Tx Power High
Warning Flag
This can be either true or false, depending on the Current Tx power value displayed
above.
Rx Power High
Warning Flag
This can be either true or false, depending on the Current Tx power value displayed
above.
Temperature Low
Warning Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage Low
Warning Flag
This can be either true or false, depending on the Current Voltage value displayed
above.
Interfaces 773