Administrator Guide

SFP+ 1 Rx Power measurement type = Average
===================================
SFP+ 1 Temp High Alarm threshold = 80.000C
SFP+ 1 Voltage High Alarm threshold = 3.700V
SFP+ 1 Bias High Alarm threshold = 10.000mA
SFP+ 1 TX Power High Alarm threshold = 0.794mW
SFP+ 1 RX Power High Alarm threshold = 1.413mW
SFP+ 1 Temp Low Alarm threshold = -10.000C
SFP+ 1 Voltage Low Alarm threshold = 2.850V
SFP+ 1 Bias Low Alarm threshold = 2.600mA
SFP+ 1 TX Power Low Alarm threshold = 0.158mW
SFP+ 1 RX Power Low Alarm threshold = 0.040mW
===================================
SFP+ 1 Temp High Warning threshold = 75.000C
SFP+ 1 Voltage High Warning threshold = 3.630V
SFP+ 1 Bias High Warning threshold = 8.500mA
SFP+ 1 TX Power High Warning threshold = 0.741mW
SFP+ 1 RX Power High Warning threshold = 1.259mW
SFP+ 1 Temp Low Warning threshold = -5.000C
SFP+ 1 Voltage Low Warning threshold = 2.970V
SFP+ 1 Bias Low Warning threshold = 3.000mA
SFP+ 1 TX Power Low Warning threshold = 0.178mW
SFP+ 1 RX Power Low Warning threshold = 0.063mW
===================================
SFP+ 1 Temperature = 34.988C
SFP+ 1 Voltage = 3.281V
SFP+ 1 Tx Bias Current = 6.746mA
SFP+ 1 Tx Power = 0.635mW
SFP+ 1 Rx Power = 0.002mW
===================================
SFP+ 1 Data Ready state Bar = False
SFP+ 1 Rx LOS state = True
SFP+ 1 Tx Fault state = False
SFP+ 1 Rate Select state = True
SFP+ 1 RS state = False
SFP+ 1 Tx Disable state = False
===================================
SFP+ 1 Temperature High Alarm Flag = False
SFP+ 1 Voltage High Alarm Flag = False
SFP+ 1 Tx Bias High Alarm Flag = False
SFP+ 1 Tx Power High Alarm Flag = False
SFP+ 1 Rx Power High Alarm Flag = False
SFP+ 1 Temperature Low Alarm Flag = False
SFP+ 1 Voltage Low Alarm Flag = False
SFP+ 1 Tx Bias Low Alarm Flag = False
SFP+ 1 Tx Power Low Alarm Flag = False
SFP+ 1 Rx Power Low Alarm Flag = True
===================================
SFP+ 1 Temperature High Warning Flag = False
SFP+ 1 Voltage High Warning Flag = False
SFP+ 1 Tx Bias High Warning Flag = False
SFP+ 1 Tx Power High Warning Flag = False
SFP+ 1 Rx Power High Warning Flag = False
SFP+ 1 Temperature Low Warning Flag = False
SFP+ 1 Voltage Low Warning Flag = False
SFP+ 1 Tx Bias Low Warning Flag = False
SFP+ 1 Tx Power Low Warning Flag = False
SFP+ 1 Rx Power Low Warning Flag = True
Related
Commands
● interface — configures a physical interface on the switch.
● show ip interface — displays Layer 3 information about the interface.
● show interfaces — displays information on a specific physical interface or virtual interfaces.
● show inventory — displays the switch type, components (including media), Dell Networking OS
version including hardware identification numbers and configured protocols.
Interfaces 777