Administrator Guide
show interfaces vlan
Display VLAN statistics.
C9000 Series
Syntax
show interfaces vlan {vlan-id} [LINE] {description}
Parameters
vlan-id
Enter the interface VLAN number. The range is from 1 to 4094.
LINE (OPTIONAL) Enter the name of the VLAN.
description Displays the VLAN interface information with description.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced this command.
Example
Dell#show interfaces vlan 10
Vlan 10 is up, line protocol is down
Address is 90:b1:1c:f4:99:ce, Current address is 90:b1:1c:f4:99:ce
Interface index is 1107787786
Internet address is not set
Mode of IPv4 Address Assignment: NONE
DHCP Client-ID: 90b11cf499ce
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d17h26m
Queueing strategy: fifo
Time since last interface status change: 2d17h26m
Input Statistics:
0 packets, 0 bytes
Output Statistics:
0 packets, 0 bytes, 0 underruns
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show range
Display all interfaces configured using the interface range command.
C9000 Series
Syntax
show range
Command Modes INTERFACE RANGE (config-if-range)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
778 Interfaces