Administrator Guide

● For DNS, enter the keyword dns.
● For FTP, enter the keyword ftp.
● For NTP, enter the keyword ntp.
● For Radius, enter the keyword radius.
● For sFlow collectors, enter the keyword sflow-collector.
● For SNMP (traps and MIB responses), enter the keywords snmp .
● For SSH, enter the keyword ssh .
● For Syslog, enter the keyword syslog.
● For TACACS, enter the keyword tacacs.
● For Telnet, enter the keyword telnet.
● For TFTP, enter the keyword tftp.
all Configure all applications.
Defaults None.
Command Modes EIS Mode (conf-mgmt-eis)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
clear management application pkt-cntr
Clear management application packet counters for all management application types.
C9000 Series
Syntax
clear management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Interfaces 785