Administrator Guide

show management application pkt-cntr
Display the number of packets for each application type that have taken the management route.
C9000 Series
Syntax
show management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
Dell# show management application pkt-cntr
dns : 2
ftp : 0
ntp : 0
radius : 0
sflow-collector : 0
snmp : 0
ssh : 0
syslog : 0
tacacs : 0
telnet : 0
tftp : 0
show management application pkt-fallback-cntr
Display the number of packets for each application type that have been rerouted to the default routing table due to
management port or route lookup failure.
C9000 Series
Syntax
show management application pkt—fallback-cntr
Defaults None.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Interfaces 787