Administrator Guide

0 Multicasts, 0 Broadcasts 63970532058 Unicasts
0 throttles, 0 discarded, 0 collisions 0 wredDrops
Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 37096.40 Mbits/sec, 57963128 packets/sec, 94.88% of line-
rate
Example (SFM
HiGig Port)
Dell# show hardware sfm 5 hg-stats port 19
Higig Port Statistics:
HiGigabitEthernet 3/5/19,
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
63970532045 packets, 5117642582960 bytes 0 underruns
0 64-byte pkts, 63970531981 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts 63970532058 Unicasts
0 throttles, 0 discarded, 0 collisions 0 wredDrops
Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 37096.40 Mbits/sec, 57963128 packets/sec, 94.88% of line-
rate
Related
Commands
clear hardware hg-stats — clears traffic statistics from internal ports in a HiGig link bundle.
show hg-link-bundle-distribution
Display the operational status and link utilization in a HiGig link bundle.
C9000 Series
Syntax
show hg-link-bundle-distribution {sfm npu-id hg-port—channel hg-port—
channel-id | slot slot npuUnit npu-id hg-port—channel 0} enable
Parameters
sfm npu-id hg-
port-channel hg-
port-channel-id
Specify a HiGig port channel on a switch SFM (spine) NPU by entering the
keyword sfm and SFM NPU ID, then hg-port-channel and a HiGig port
channel ID. SFM NPU ID is 0; SFM HiGig port-channel IDs are 0 to 10.
slot slot-id
npuUnit npu-id
hg-port-channel
0
Specify a HiGig port channel on a line-card (leaf) NPU by entering the keyword
slot and slot number, then npuUnit and NPU ID, then hg-port-channel 0.
Line-card slot numbers are 0 to 11; line-card NPU ID is 0. The HiGig port-channel ID
is from 0 to 2.
Command Modes
EXEC, EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2.(1.0) Introduced on the Z9500.
9.3.0.0 Introduced on the Z9000.
Usage
Information
The following table illustrates the fields displayed in the output of this command:
Interfaces 803