Administrator Guide

Table 4. show hg-link-bundle-distribution Command Description
Field Description
Link-bundle trigger threshold Percentage value of link-bundle bandwidth that
serves as the threshold for marking a link bundle
as being overutilized, triggering link-bundle
monitoring, and generating an SNMP alarm.
Slot Slot number of a line card.
npuUnit Network processing unit (NPU) ID number of a
HiGig link bundle/port-channel.
hg-port-channel Port-channel number of a HiGig link bundle.
Utilization (In Percent) Percentage of total bandwidth usage by the
traffic transmitted on the HiGig link bundle.
Alarm State Indicates whether an alarm has been generated if
uneven traffic distribution occurs in a HiGig link
bundle. Possible values are Active and Inactive.
Interface Member interface of the specified HiGig link
bundle/port channel in the format:
slot-id/npu-id:hghigig-port-number
Utilization (In Percent) Percentage of total link-bundle bandwidth used
on each member link.
Example
Dell#show hg-link-bundle-distribution slot 0 npu 0 hg-port-channel 0
hg-link-bundle trigger threshold - 60
HiGigabitEthernet Link Bundle 0/0/0,
Utilization [In Percent] - 0 Alarm State - Inactive
Interface Utilization [In Percent]
0/0:hg27 0
0/0:hg28 0
0/0:hg29 0
snmp-server enable traps hg-lbm
Enable the generation of SNMP traps and notifications when HiGig link-bundle monitoring is enabled.
C9000 Series
Syntax
snmp-server enable traps hg-lbm
Parameters
hg-lbm Enter the keyword hg-lbm to enable traps for HiGig link-bundle monitoring.
Command Modes
CONFIGURATION mode
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.2.1.0 Introduced on the Z9500.
804 Interfaces