Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

821

822

823

824

825

826

827

828

829

830

Defaults 30 seconds

Command Modes ROUTER ISIS

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.3.1.0 Introduced on the E-Series.

Commands

graceful-restart t3 — configures the overall wait time before graceful restart completes.

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the interval before

the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is received from the helping router.

C9000 Series

Syntax

graceful-restart t1 {interval seconds | retry-times value}

To return to the default, use the no graceful-restart t1 command.

Parameters

interval Enter the keyword interval to set the wait time. The range is from 5 to 120

seconds. The default is 5 seconds.

retry-times Enter the keywords retry-times to set the number of times the request interval

is extended until a CSNP is received from the helping router. The range is from 1 to

10 attempts. The default is 1.

Defaults Refer to Parameters.