Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

831

832

833

834

835

836

837

838

839

840

isis ipv6 metric

Assign metric to an interface for use with IPv6 information.

C9000 Series

Syntax

isis ipv6 metric default-metric [level-1 | level-2]

To return to the default values, use the no ipv6 isis metric [default-metric] [level-1 |

level-2] command.

Parameters

default-metric

Metric assigned to the link and used to calculate the cost from each other router

via the links in the network to other destinations. You can configure this metric for

Level 1 or Level 2 routing. The range is from 0 to 16777215. The default is 10.

level-1 (OPTIONAL) Enter the keywords level-1 to configure the shortest path first

(SPF) calculation for Level 1 (intra-area) routing. This value is the default.

level-2 (OPTIONAL) Enter the keywords level-2 to configure the SPF calculation for

Level 2 (inter-area) routing.

Defaults default-metric = 10; level-1 (if not otherwise specified)

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

7.5.1.0 Introduced on the E-Series.

Usage

Information

Dell Networking recommends configuring metrics on all interfaces. Without configuring this command, the

IS-IS metrics are similar to hop-count metrics.

isis metric

Assign a metric to an interface.