Administrator Guide

session-key
Specify the session keys used in the crypto policy entry.
C9000 Series
Syntax
session-key {inbound | outbound} {ah spi hex-key-string | esp spi encrypt
hex-key-string auth hex-key-string
To delete the session key information from the crypto policy, use the no session-key {inbound |
outbound} {ah | esp} command.
Parameters
name Enter the name for the transform set.
inbound Specify the inbound session key for IPSec.
outbound Specify the outbound session key for IPSec.
ah Use the AH protocol when you select the AH transform set in the crypto policy.
esp Use the ESP protocol when you select the ESP transform set in the crypto policy.
spi Enter the security parameter index number.
hex-key-string Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES
algorithms, specify at least 16 bytes per key. For SHA algorithms, specify at least
20 bytes per key.
encrypt Indicates the ESP encryption transform set key string.
auth Indicates the ESP authentication transform set key string.
Defaults none
Command Modes CONF-CRYPTO-POLICY
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
● This command is only available in the ipsec-manual model.
● The key information entry is associated with the global method for enabling clear text or encrypted
display in the running config.
show crypto ipsec transform-set
Display the transform set configuration.
C9000 Series
Syntax
show crypto ipsec transform-set name
Parameters
name Enter the name of the transform set.
896 Internet Protocol Security (IPSec)