Administrator Guide

clear ip traffic
Clear IP traffic statistics on the switch CPUs.
C9000 Series
Syntax
clear ip traffic {cp | rp}
Parameters
cp Clear ip traffic statistics on the Control Processor CPU.
rp Clear ip traffic statistics on the Route Processor CPU.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands
show ip traffic — displays IP traffic statistics.
clear tcp statistics
Clear TCP counters.
C9000 Series
Syntax
clear tcp statistics [all | cp | rp]
Parameters
all Enter the keyword all to clear TCP statistics maintained on all switch processors.
cp (OPTIONAL) Enter the cp to clear TCP statistics only from the Control Processor.
rp (OPTIONAL) Enter the keyword rp1 to clear TCP statistics only from the Route
Processor.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
908 IPv4 Routing