Administrator Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Regular evaluation optimization enabled/disabled added to display output.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Example
Dell#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
C9000 Series
Syntax
show ip route hostname | ip-address [mask] [longer-prefixes] | list prefix-
list | protocol [process-id | routing-tag] | all | connected | static |
summary] [vrf vrf-name]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the VRF name to list the routes in
the route table of a specific VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the
IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list. For
more information, refer to the show ip route list command.
944 IPv4 Routing